![]() ![]() Using one hand to keep the bowstring strands separated, use the other to carefully insert the peep sight in the correct position between the two strands so that the strands slide into these notches as you begin to release the tension on the strands. This allows you to place the separated bowstring strands. Most peep sights are small plastic tubes that have a groove or channel on the outside. Place the Peep In Between the Strands at the Marked Location ![]() There are also bowstring separator tools that can help you with this step. Many times they are different colors to make this process easier. Most bowstrings are constructed of two strands that are intertwined. With enough slack in your bowstring, you can now slowly and carefully begin separating the two intertwined strands that make up your bowstring. Carefully Separate the 2 intertwined Strands of the Bowstring at Your Marked Location If you do not have one you can borrow one from a friend or rent one from an archery shop. There are many great and economical bow presses on the market. Properly inserting a peep sight will require slack in your bowstring that will only come with a bow press. Using a bow press, release the tension in your bowstring. Place Bow in a Bow Press and Release Tension Everyone’s ideal location will be different depending on the bow, your anchor points, front sights, etc. This will be where your peep sight will go. Have your friend take a marker and mark the bowstring at the location where it is level with your dominant eye’s pupil. Position yourself as though you are going to take a shot and utilize all of your usual anchor points. The easiest way to do this is to get the help of a friend or family member. The first step to tie a peep sight is to find the exact location you need to place it. Find the Correct Position for the Peep Sight Here are the simple steps to properly tie in a peep sight to get it just right: 1. If it is not in the right place, your alignment will be off or the peep sight might be unusable entirely. One of the most important aspects of using a peep sight is ensuring that it is properly installed and in the correct position. With the bow sights lined up with the intended target through the peep sight, you are ready to go on to the next steps of the shooting process! How To Tie In A Peep Sight If you can’t see either the target or the bow sights through the peep sight, you are not in alignment. This ensures that everything stays lined up. ![]() With some adjusting of your hands, arms, and bow, you will now need to align your bow sights with your target, all while looking through the peep sight. Look through the peep sight with the dominant eye and get a clear sight of your bow sights and your intended target. In fact, if your bow is already sighted in and the bow sights are adjusted, you only need to peer through the peep sight in order to use it.Īfter coming to full draw and following all of the steps to take a proper shot, your peep sight should be resting in front of your dominant eye. How To Use A Peep SightĪlthough it may sound complicated, using a peep sight on a bow is extremely easy to do. With everything aligned, you can achieve much more consistent and accurate shots. It allows you to align the peep sight, the bow sight, and your target altogether. It is used in a similar fashion to the rear sights of a rifle. Generally circular in shape, it is designed to help you get a more consistent shot and alignment when shooting and is simply there for you to look through. The peep sight on a bow is the small aiming device that is mounted to the bowstring. If you do not know how to tie or install a peep sight or need a simple refresher, then you have come to the right place! What Is A Peep Sight? Peep sights are an essential piece of equipment for most archery setups, but many archers might be unaware of how to tie in a peep sight themselves. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |